CHEMIPHASE Emulsion Breaker 210 is designed to aid removal of wash water from bio diesel production. Emulsion Breaker is to be used when water washing takes place. Emulsion Breaker 210 will speed up the splitting of the oil and water separation producing two distinct layers.
Treatment Process:
Once the biodiesel reaction has been completed, then remove Glycerine layer prior to washing stage.
To wash the diesel, the CHEMIPHASE Emulsion Breaker 210 should then be dosed to the water.
We suggest the water is first heated to approximately 40 degrees C. Then the correct level of Emulsion Breaker 210 is then added to the warm water.
This should be then mixed well to ensure all of the emulsion breaker 210 has dispersed correctly. This aqueous mixture should then be added to the bio diesel to remove the contaminants contained in the oil. Emulsion Breaker 210 will rapidly bring about the oil/water splitting process.
Dilution Rates:
We recommend 2-4 Litres per 1000 litres of water are added, but this dependant upon the quality of the raw oil initially used.
Once mixed well, turn off the mixing equipment then leave to stand to ensure the full separation occurs prior to running the water layer off the bottom of the tank.
Should further information be required then please contact our technical department for more details or how we believe we can help you improve your bio diesel production and quality
Safety Data Information:
Please Consult the Material Safety Data Sheet on Emulsion Breaker 210
