The Recommended addition of ALLKLEAR 400
Typical addition rates are between 0.1% to 0.5% by volume (i.e. 1–5 litres made up to 1,000 litres with the biodiesel produced ).
Generally the required treat rate will be dependent upon the natural stability of the biodiesel produced. The customer must determine the required dosage and check compatability with the biodiesel .
Please note: presence of other (suppliers) additives may alter the ALLKLEAR 400 dosage rates suggested.
ALLKLEAR 400 will control the premature oxidation of unsaturated fatty acid esters in biodiesel. And the formation of highly volatile compounds and corrosive carboxylic acids that are well known to form polymerized and cross-linked biodiesel gums that can precipitate and damage all types of diesel engines.
ALLKLEAR 400 also contains a dispersant & a powerful biocide to control any microbiological activity during storage
ALLKLEAR 400 does not have a corrosive action on metals and combusts without residue. It is not a hazardous material and does not require labeling in line with the Regulations on Hazardous Substances. |
